If you intend to live adventures and wet, treasure hunting in shallow water can be very impressive. Many swimmers often lose inadvertently rings, coins, and other precious jewels that are there, waiting to be found. Lost treasures on the beach are also washed away by the tide because most of those looking at the beach specialize in searching sandy areas, you can claim to be the first to find these treasures submerged underwater. Some treasure hunters use underwater snorkel or dive while detecting metals on the ocean floor. If you prefer to use your metal detector with its head above water, walk or wade will be the best option. Be delighted with what you can find up to six feet deep underwater!
Here are some examples of treasures that can be found on the beach:
- Gold and diamond ring
- Gold and silver necklaces and bracelets and watches
- Silver coins and gold
- Buttons Civil War uniforms
- Sheets trade before the Civil War
- Religious medallions with precious stones
Search shallows include detecting the mark of the highest tide to about knee height. The tide watermark is the level reached by seawater during high tide.
Equipment Required: Metal Detector waterproof – either a ground VLF with setting or Pulse Induction model. A shovel sand short or long handle and boots or waders in cold water.
When walking in shallow water when the tide is, you should be able to find more coins and jewelry and less trash on the dry beach. Searchers surface water should always work against the tide. If you reach the beach a few hours before low tide, you can search while the tide is receding and until it begins to rise again. Experts say that the most productive areas are in deeper waters where people swim during high tides. They also advise remembering that the wind and storms deposited items of similar weight together in small or along the shore areas. That’s why you can find various rings in a single output. Once your detector has captured and identified a target, be sure to mark the point’s easy to miss between the movement of the waves. Use your shovel to dig sand and get your goal, but check the hole with your detector again before returning the sand to your site. This way, you will not lose your target. If you cannot find anything after removing the sand several times, advancing 90 degrees in each consecutive stroke. When the signal stops, the target should be at its shovel. A bag takes waist be perfect to save the treasures finds.
Wading to Find Treasures
Wading to find treasures typically considered detected in water from above the knee to the neck.
Required equipment: A metal detector waterproof very low frequency (VLF) for fresh water; VLF either a model or Pulse Induction salt water, a long-handled or circular shovel to dig and find targets and a floating filter to sift through and find their treasures.
Wading to find treasures can easily pay dividends, but it’s required to have more equipment. Depending on the season and water temperature, you may need a wetsuit to keep warm. In colder waters, many fans detection can also be equipped with rubber boots and a belt high to counteract the buoyancy of the wetsuit. A long beach shovel handle is required to recover its objectives lake or ocean floor, which could be sandy, rocky or clay. Experts also recommend carrying a floating filter. Once you have located a target, a shovelful deep in the sand. Then recheck your target hole. If the target is still there, release the shovelful and take another before putting it in your filter. When discloses the sand through your filter, your objective should become visible.
Treasure hunters on the beach and underwater have strong preferences for specific metal detectors to search underwater. In the reviews, the detector Garrett AT Pro is often praised for its superior function of discrimination in freshwater. The Treasury brand also gets high marks for Sand Tiger Shark and Shark. The ATX Garrett and Fisher CZ-21 are both excellent choices for use in both saltwater beaches as sweet. Metal detectors for underwater search are available in different varieties, Pulse Induction or Very Low Frequency (Very Low Frequency / VLF). Most detectors for use underwater operate at depths up to 200 feet and are designed with sensitivity to the metal search depth.
Metal Detectors Pulse Induction is best for search in salt water and can usually find hidden deeper objectives. They are designed to ignore salt, which is ideal for seekers in the ocean. Its disadvantage is that it cannot discriminate iron targets and trash without also losing good signs. PI detectors do not require movement, so continue to sound if sustained directly on a target.
Here are a few of the recommended Metal detectors PI:
- Tesoro Sand Shark
- Garrett Sea Hunter Mark II
- Garrett ATX
- Garrett Infinium LS
- Garrett AT Pro
- Tesoro Tiger Shark
- Metal Detector Fisher CZ-21 Coil 10 “
I have only recently started using a metal detector and I took at look at www.metaldetectordirect.com before I went ahead, I just read some reviews and made sure to get one that was waterproof!